| RILSAN BESN NOIR P40 TL |
PA-11 black plasticized |
Extrusion |
|
| RILSAN BMN BLACK TLD |
PA-11 black |
Injection |
|
| RILSAN BMNO P20 TLD |
PA-11 Nat, plasticized |
Injection |
|
| RILSAN BMNO P40 TLD |
PA-11 Nat, plasticized |
Injection |
|
| RILSAN BMNO TLD |
PA-11 Nat |
Injection |
|
| RILSAN CLEAR G850 |
PA-11 Transparent |
Injection |
|
| RILSAN CLEAR G850 RNEW |
PA-11 Transparent, bio-based |
Injection |
|
| RILSAN PA11 BMNO TLD |
PA-11 UF Nat, bio-based, heat and UV stabilized |
Injection |
|
| RILSAN BESN BLACK P20 TL |
BIO-BASED, HEAT & LIGHT STABILIZED |
Injection & Extrusion |
|
| RILSAN BESNO P20 TL |
Bio-Based, Heat & Light Stabilized |
Extrusion |
|
| RILSAN BESN BLACK P212 CTL |
BIO-BASED, CONDUCTIVE, HEAT STABILIZED |
Injection & Extrusion |
|
| RILSAN X1002 BLACK |
GF50, Fiberglass Reinforced |
Injection |
|
| RILSAN 8020 |
Translucent flexible copolyimide based on renewable resources and without plasticizer. This grade is specially designed for medical uses |
Extrusion |
|
| RILSAN BESVO A FDA |
Additive free, Good thermal and chemical resistance, Transparency, Bio-based, Low oligomers. |
Extrusion |
|
| RILSAN BECNO TL (NATURAL) |
Bio-based PA11 natural grade for cable coating. >98% renewable carbon. Applications: wire and cable sheathing. |
Injection & Extrusion |
|
| RILSAN BES BLACK PR |
Bio-based PA11 black grade, plasticized for extrusion. Applications: fluid transportation, automotive tubing. |
Extrusion |
|
| RILSAN BESN BLACK P40 TL |
Bio-based PA11 black grade, plasticized for extrusion. Applications: fluid transport, air brake lines, fuel lines. |
Extrusion |
|
| RILSAN BESN P024 TL (BLACK) |
Bio-based PA11 impact-modified grade. Designed for low extractible fuel line applications. Applications: cooling circuits, gasoline lines. |
Extrusion |
|
| RILSAN BESN P20 TL (BLACK) |
Bio-based PA11 black grade, plasticized for extrusion. Applications: fluid transport, automotive tubing. |
Injection & Extrusion |
|
| RILSAN BESN P210 TL (BLACK) |
Bio-based PA11 black grade, plasticized for extrusion. 89% renewable carbon. Applications: fluid transport, automotive tubing. |
Injection & Extrusion |
|
| RILSAN BESN P213 TL (BLACK) |
Bio-based PA11 impact-modified grade. Improved hydrolysis resistance. Applications: cooling lines, SCR lines, heavy truck H2/gas lines. |
Extrusion |
|
| RILSAN BESN TL (BLACK) |
Bio-based PA11 black grade for extrusion. Applications: fluid transport, metal tubing sheathing. |
Extrusion |
|
| RILSAN BESNO MED |
Bio-based Polyamide 11 from renewable castor oil, specifically designed for medical extrusion applications, offering high purity, excellent chemical resistance, good flexibility, and reliable mechanical and thermo-mechanical properties |
Injection |
|
| RILSAN BESNO P40 POL BB 1000K |
Renewable PA11 with high flexibility, excellent impact resistance (no break in Charpy tests), good mechanical strength, low-temperature toughness, and suitability for extrusion applications |
Extrusion |
|
| RILSAN BESNO P40 TL (NATURAL) |
Plasticized bio-based PA11 developed for tube extrusion, offering excellent flexibility, high impact resistance, good chemical resistance, and stable mechanical performance |
Extrusion |
|
| RILSAN BESNO TL (NATURAL) |
Bio-based Polyamide 11 providing a balance of flexibility and mechanical strength, excellent resistance to chemicals, good barrier properties, and suitability for extrusion processes |
Extrusion |
|
| RILSAN BESVO A MED |
Medical-grade PA11 with high purity, low extractables, excellent chemical resistance, flexibility, and compliance with stringent medical application requirements |
Extrusion |
|
| RILSAN BMN TLD (BLACK) |
Injection-molding PA11 compound offering good stiffness, high mechanical strength, impact resistance, thermal stability, and light-stabilized performance |
Injection |
|
| RILSAN BMNO |
PA11, natural grade, 98% bio-based carbon content (ASTM D6866). No additives, food contact approved. Tensile modulus: 1280 MPa. Yield stress: 41 MPa. Shore D hardness: 68. Melting temperature: 189°C. Applications: Injected food parts. |
Injection |
|
| RILSAN BMV 5 P20D (WHITE) |
PA11 compound, bio-based (castor oil). Injection molding grade. Shrinkage: 1.5% (parallel/normal). Tensile modulus: 515 MPa. Yield stress: 32 MPa. Shore D hardness: 61. Melting temperature: 186°C. Applications: Outdoor balls, shuttlecock. |
Injection |
|
| RILSAN BMW WITHE 5 P20D |
PA11 compound, bio-based (castor oil). Injection molding grade. Shrinkage: 1.5% (parallel/normal). Tensile modulus: 515 MPa. Yield stress: 32 MPa. Shore D hardness: 61. Melting temperature: 186°C. Applications: Outdoor balls, shuttlecock. |
Injection |
|
| RILSAN BSR30 R30 TLD (BLACK) |
PA11, carbon fiber reinforced, 30% recycled (Virtucycle® program). Bio-based carbon content: 63%. Tensile modulus: 18500 MPa. Stress at break: 184 MPa. Shore D hardness: 80–83. Melting temperature: 184°C. Applications: Equipment. |
Injection |
|
| RILSAN BUM 30 O (NATURAL) |
PA11, glass bead reinforced, bio-based. WRAS drinking water approval. Tensile modulus: 1850 MPa. Stress at break: 31 MPa. Shore D hardness: 71. Melting temperature: 189°C. Applications: Drinking water. |
Injection |
|
| RILSAN BZM 30 TL (BLACK) |
PA11, fiberglass reinforced, bio-based. Tensile modulus: 6900 MPa. Stress at break: 110 MPa. Shore D hardness: 74. Melting temperature: 189°C. Applications: Quick connectors. |
Injection |
|
| RILSAN BZM 8 OTL (NATURAL) |
PA11, fiberglass reinforced, bio-based. Tensile modulus: 2300 MPa. Stress at break: 56 MPa. Shore D hardness: 73. Melting temperature: 189°C. Applications: Springs for quick connectors, outsoles. |
Injection |
|
| RILSAN CLEAR G170 IN |
Transparent amorphous polyamide. Heat stabilized. Tensile modulus: 2100 MPa. Yield stress: 76 MPa. Shore D hardness: 79. Glass transition temperature: 168°C. Applications: Sport equipment, health consumables, electronics. |
Injection |
|
| RILSAN CLEAR G350 SC |
High-performance transparent polyamide designed for injection molding, offering full transparency, flexibility, chemical resistance and durability for clear components such as eyewear frames and functional parts. |
Injection |
- |
| RILSAN CLEAR G830 SC |
Bio-based transparent polyamide with high clarity and toughness, ideal for eco-design and high-clarity applications, combining transparency with durability and chemical resistance. |
Injection |
- |
| RILSAN FX0014 (BLACK) |
TDS not publicly available online; typical Rilsan® PA11 based compound designed for enhanced mechanical and chemical performance in demanding molded parts (based on family description of Rilsan® PA11 performance). |
Extrusion |
- |
| RILSAN G350 (CLEAR) |
Transparent polyamide grade with design freedom, full transparency, flexibility and good chemical resistance for injection molding applications. |
Injection |
- |
| RILSAN G820 RNEW (CLEAR) |
Transparent copolyamide, bio-based (45%). Tensile modulus: 1680 MPa. Yield stress: 64 MPa. Shore D hardness: 74. Glass transition temperature: 145°C. Applications: Eyewear frames, optics, smartphone frames. |
Extrusion |
|
| RILSAN G820 RNEW (CLEAR) SC |
Bio-based transparent polyamide with good transparency, chemical resistance and processing stability, suitable for clear injection molded parts. |
Extrusion |
|
| RILSAN G850 RNEW (CLEAR) |
Transparent copolyamide, bio-based (45%). Tensile modulus: 1680 MPa. Yield stress: 64 MPa. Shore D hardness: 74. Glass transition temperature: 145°C. Applications: Eyewear frames, optics, smartphone frames. |
Injection |
|
| RILSAN HT CESV BLACK P010 HP TL |
Polyphthalamide compound, bio-based (48%). Flexible, high thermal and chemical resistance. Tensile modulus: 1050 MPa. Yield stress: 34 MPa. Shore D hardness: 66. Melting temperature: 260°C. Applications: Automotive fluid transfer lines. |
Extrusion |
|
| RILSAN HT CESV P010 TL (BLACK) |
Flexible polyphthalamide, bio-based (48%). Tensile modulus: 1015 MPa. Yield stress: 30 MPa. Shore D hardness: 66. Melting temperature: 260°C. Applications: Automotive tubing, hydraulic and pneumatic lines. |
Extrusion |
|
| RILSAN HT CSR 13 |
Fiber reinforced polyphthalamide, bio-based (52%). Conductive grade. Tensile modulus: 7600 MPa. Stress at break: 151 MPa. Shore D hardness: 66. Melting temperature: 255°C. Applications: Conductive automotive quick connectors. |
Injection |
|
| RILSAN HT CZM 30 TLD (BLACK) |
TDS not publicly available online; reinforced high-temperature PA11 alloy designed for engineered parts needing mechanical strength and thermal performance (Arkema PA11 range known for durability). |
Injection |
|
| RILSAN MB 3000 (NATURAL) |
PA11, halogen-free flame retardant. Melt flow 95 cm³/10 min. Tensile modulus 1830 MPa, yield stress 45 MPa, Shore D 69, melting temp 189°C. Burning class V-0, oxygen index 33%. Density 1090 kg/m³. Applications: wire/cable sheathing, rollers. |
Injection |
|
| RILSAN MG350 CLEAR |
TDS not publicly available online separately; expected to share typical Rilsan® Clear characteristics — transparency, design flexibility, and chemical resistance for molded components. |
Injection |
- |
| RILSAN TESN BLACK P413TL |
TDS not publicly available online; PA11 resin likely plasticized for improved flexibility and mechanical resilience in injection molded components (general PA11 family behavior). |
Injection |
- |
| RILSAN TESN BLACK P513 TL |
TDS not publicly available online; similar to P413TL with tailored plasticization for enhanced flexibility and toughness |
Injection |
- |
| RILSAN TESNO P413 TL |
TDS not publicly available online; PA11 resin plasticized for resilience and chemical resistance in molded applications. |
Injection |
- |
| RILSAN TIEFLEX R073 T6L (BLACK) |
TDS not publicly available online; PA11-based flexible tie layer elastomer grade (Arkema product family information suggests tie layer applications). |
Extrusion |
|
| RILSAN TIEFLEX R463 |
Polyamide alloy, partially bio-based. Melt flow 8 cm³/10 min. Tensile modulus 500 MPa dry, 330 MPa conditioned. Yield stress 28 MPa, yield strain 50%. Melting temp 214°C. Density 1.08 g/cm³. Applications: heavy truck air brake lines. |
Extrusion |
|
| RILSAN TIEFLEX R463 BLACK |
Polyamide alloy pellet partially bio-based designed for multilayer air brake applications as structural tie layer in tubing, offering flexibility and renewable content. |
Extrusion |
|
| RILSAN TIEFLEX R473 NATURAL TL |
Flexible tie layer alloy, partially bio-based. Melt flow 5.4 cm³/10 min. Stress at 50% strain 28 MPa. Strain at break >50%. Charpy notched impact 100 kJ/m² at +23°C, 11 kJ/m² at -30°C. Melting temp 215°C. Density 1100 kg/m³. Applications: air brake tubing. |
Extrusion |
|
